|
|
|
|
|
17625 Electronic Advance Ignition Systems And Module For Big Twin & Sportster - "DYNATEK"
|
The ignition module is a self contained electronic advance ignition that is microcomputer controlled, generating extremely accurate control over the entire ignition process without the need for the external ignition module.
The ignition module can be run in the single or dual fire mode and used with single or dual plug heads when used with the correct OHM coil or combination of coils. For street use 2.8 through 3.5 OHM coils
Four independent rev limiter choices from 6000 to 7500 RPM
Dramatic, user friendly improvement over the OE ignition
The Kits include ignition module and DYNATEK end mount style coils. The six individual switches allow you to tailor fit one of the eight different advance curves to produce a spark knock free ignition, whether you are running the stock displacement or a highly modified high compression Stroker. A separate Tach output lead is included along with one LED indicator for static timing and one LED to assist in trouble shooting potential problems and the condition of VOES. Custom coil mounts must be used on kits with end mount style coils and can be found in the Electric Section
Fits Big Twin 1970/1999 (except fuel injected models and Twin Cam 88") and Sportster 1971/Later (except 1200 Sport).
"DYNATEK" Ignition System Kit Includes
(1) 2000i Ignition Module 17624
(2) Single fire, single plug 3 OHM end mount coils
Retail List - $399.95 Wt - 2.692lbs.
|
|
$399.95 Moto's Price! $342.95
|
|
|
|
|
|
|
|
|
|
|
|
17626 Electronic Advance Ignition Systems And Module For Big Twin & Sportster - "DYNATEK"
|
The ignition module is a self contained electronic advance ignition that is microcomputer controlled, generating extremely accurate control over the entire ignition process without the need for the external ignition module.
The ignition module can be run in the single or dual fire mode and used with single or dual plug heads when used with the correct OHM coil or combination of coils. For street use 2.8 through 3.5 OHM coils. Four independent rev limiter choices from 6000 to 7500 RPM Dramatic, user friendly improvement over the OE ignition. The Kits include ignition module and DYNATEK end mount style coils
The six individual switches allow you to tailor fit one of the eight different advance curves to produce a spark knock free ignition, whether you are running the stock displacement or a highly modified high compression Stroker. A separate Tach output lead is included along with one LED indicator for static timing and one LED to assist in trouble shooting potential problems and the condition of VOES.
Custom coil mounts must be used on kits with end mount style coils and can be found in the Electric Section
Fits Big Twin 1970/1999 (except fuel injected models and Twin Cam 88") and Sportster 1971/Later (except 1200 Sport).
"DYNATEK" Ignition System Kit includes
(1) 2000i Ignition Module 17624
(2) Single fire, dual plug 3 OHM end mount coils
Retail List - $399.95 Wt - 2.698lbs.
|
|
$399.95 Moto's Price! $335.95
|
|
|
|
|
|
|
|
|
|
|
|
17900 Magneto Covers And Gasket For Two Terminal Magnetos Black cover.
|
These covers will fit original equipment Harley-Davidson two terminal magnetos as well as Fairbanks Morse, Joe Hunt, and Morris two terminal magnetos.
Black cover.
Retail List - $19.95 Wt - 0.22lbs.
|
|
$19.95 Moto's Price! $12.95
|
|
|
|
|
|
|
|
|
|
|
|
16165 Ignition Coil & Ignition Switch Relocation Kit For Sportster
|
Relocate the ignition switch and the ignition coil for custom applications or when using 81042 gas tank kit. The kit includes a chrome plated steel bracket with hardware for mounting the coil and a black steel adapter piece for the ignition switch mount. Fits Sportster 1995/Later. (Imported)
Retail List - $24.95 Wt - 0.45lbs.
|
|
$24.95 Moto's Price! $14.95
|
|
|
|
|
|
|
|
|
|
|
|
16601 Coil Mount Stud Kit For Big Twin - "COLONY"
|
"COLONY" Cadmium plated studs, nuts, and washers to mount coil mounting plate and terminal box to frame. Fits Big Twin 1956/Early 1982 (8 pieces).
Retail List - $12.95 Wt - 0.174lbs.
|
|
$12.95 Moto's Price! $6.95
|
|
|
|
|
|
|
|
|
|
|
|
17059 Mechanical Advance Electronic Ignition For Big Twin 1936/1969
|
Designed for dual fire applications with single or dual spark plug heads. Designed with built-in mechanical spark advance unit. Using Mallory's time tested breakerless ignition circuit, ombined with modern surface mount Thermal-CladŽ construction, the kit can drive any ignition coil or combination of ignition coils with a total primary resistance of at least 2.0 OHMs. We recommend ignition coils with 2.3-3.0 OHMs for racing applications and ignition coils with 3.0-4.0 OHMs for street and highway use
Incorporates an infrared light beam and an optical interrupter to trigger the ignition. This type of trigger is extremely accurate and much more effective than hall effect (magnetic) type ignitions. Use with spiral core or carbon core suppression-type spark plug wires
Billet alluminum ignition can easily be installed without removing the front cylinder head
Installation insructions are included
Use 17535 hold down clamp for 1936/1965 models
Fits Big Twin 1936/1969 with 12-volt Charging System
Retail List - $349.95 Wt - 1.734lbs.
|
|
$349.95 Moto's Price! $272.50
|
|
|
|
|
|
|
|
|
|
|
|
17522 Ignition Parts For Big Twin And Sportster
|
When replacing a faulty ignition pickup sensor or upgrading your outdated points system, use this OEM sensor with confidence. Also a great shop tool for quickly troubleshooting ignition problems.
Compatible with all aftermarket ignition modules that require the stock pickup sensor.
Fits FL and FX 1980/1985, Softail 1984/1995, FLT 1980/1993, FXR 1982/1994, and Sportster 1980/1993
Replaces HD# 32400-80A
Retail List - $59.95 Wt - 0.124lbs.
|
|
$59.95 Moto's Price! $49.95
|
|
|
|
|
|
|
|
|
|
|
|
17523 Big Twin And Sportster - Replacement OEM ignition Rotor.
|
Replacement OEM ignition Rotor. (Mounting Screw Not Included) Sold each
Fits all models 1980/2003 (except Twin Cam 88, Sportster 1200s and EFI engines)
Replaces HD# 32402-83
Retail List - $4.95 Wt - 0.07lbs.
|
|
$4.95 Moto's Price! $2.95
|
|
|
|
|
|
|
|
|
|
|
|
17545 Electronic Ignitions & Kits For Big Twin & Sportster - "DYNATEK" Ignition only kit. Dual Fire
|
Completely self contained electronic ignition system that utilizes your OEM mechanical advance unit
Hall effect style ignition which uses magnetic pickups to trigger the spark. Available in single or dual fire versions, with or without ignition coil(s). The complete kits include 5 OHM coil(s) and are recommended for street use, 3 OHM coils are recommended for racing
For best results use with our tuneable advance kit 17548
Instructions included "DYNATEK" Ignition only kit. Dual Fire Electronic Ignition System
Fits Big Twin 1970/1999 and Sportster 1971/2003.
Retail List - $129.95 Wt - 0.39lbs.
|
|
$129.95 Moto's Price! $99.95
|
|
|
|
|
|
|
|
|
|
|
|
17546 Electronic Ignitions & Kits For Big Twin & Sportster - "DYNATEK" Ignition Only kit. Single fire
|
Completely self contained electronic ignition system that utilizes your OEM mechanical advance unit, Hall effect style ignition which uses magnetic pickups to trigger the spark. Available in single or dual fire versions, with or without ignition coil(s). The complete kits include 5 OHM coil(s) and are recommended for street use
3 OHM coils are recommended for racing. For best results use with our tuneable advance kit 17548
Instructions included
"DYNATEK" Ignition Only kit. Single fire Electronic Ignition system
Fits Big Twin 1970/1999 and Sportster 1971/2003
Retail List - $159.95 Wt - 0.5lbs.
Products Features: No Features for this product
Note: Will not fit EFI models, TC88 or Sportster 1200S
Note: Must be used with a mechanical advance unit
Note: When using single fire electronic ignition system 17546 or 17623 you must purchase 17547 if you want to retain your tachometer.
We do not stock this in inventory takes two days to receive.
|
|
$159.95 Moto's Price! $125.95
|
|
|
|
|
|
|
|
|
|
|
|
17617 Single Fire Ignition System For Big Twin And Sportster
|
Complete High Output Single fire Ignition System.
Included is Crane's easy to adjust HI-4 ignition module, Crane's 30,000 plus volt single fire coil and Crane's 8.5mm double silicone premium quality spark plug wires.
Included with the 40" long "cut to length" spark plug wires are straight plug wire to coil boots and 90 degree boots. The HI-4 ignition module fits under the gear cover housing with no need for external OEM ignition module and RPM limiter. Fully adjustable advance curves and adjustable REV limiter from 4000/9000 RPM.
A tachometer hook up wire is also standard.
Switch for kick start or electric start. The kickstart model fires the first cylinder that comes up on compression stroke for that impressive one kick starting with little chance of kickback. The electric start mode allows the starter to spin over before the ignition is activated, which creates less draw on the battery and less strain on the starter motor.
OEM point/race switch. OEM point mode can be used with or without the OEM VOS unit for street usage and the race mode is for all out full throttle racing.
LED light for simple static timing and troubleshooting.
Complete detailed instructions included
Fits Big Twin 1970/1999 & Sportser 1971/2003
Note Will not fit EFI, TC 88 models or Sportster 1200S
|
|
$475.50 Moto's Price! $369.95
|
|
|
|
|
|
|
|
|
|
|
|
17622 Electronic Ignitions & Kits For Big Twin & Sportster - "DYNATEK"
|
Completely self contained electronic ignition system that utilizes your OEM mechanical advance unit
Hall effect style ignition which uses magnetic pickups to trigger the spark. Available in single or dual fire versions, with or without ignition coil(s). The complete kits include 5 OHM coil(s) and are recommended for street use, 3 OHM coils are recommended for racing.
For best results use with our tuneable advance kit 17548
Instructions included:
"DYNATEK" Complete Kit with Coils. Dual Fire Ignition System Kit includes 16039 Dyna 5 OHM ignition coil
Fits Big Twin 1970/1999 and Sportster 1971/2003
Note: Will not fit EFI models, TC88 or Sportster 1200S
Note: Must be used with a mechanical advance unit
Note: When using single fire electronic ignition system 17546 or 17623 you must purchase 17547 if you want to retain your tachometer
|
|
$199.95 Moto's Price! $159.95
|
|
|
|
|
|
|
|
|
|
|
|
17623 Electronic Ignitions & Kits For Big Twin & Sportster - "DYNATEK
|
Completely self contained electronic ignition system that utilizes your OEM mechanical advance unit
Hall effect style ignition which uses magnetic pickups to trigger the spark. Available in single or dual fire versions, with or without ignition coil(s). The complete kits include 5 OHM coil(s) and are recommended for street use, 3 OHM coils are recommended for racing. For best results use with our tuneable advance kit 17548
Instructions included:
"DYNATEK" Complete Kit with coil. Single Fire ignition system kit includes 16045 Dyna 5 OHM ignition coils (2). Requires custom coil mount
Fits Big Twin 1970/1999 and Sportster 1971/2003
Note: Will not fit EFI models, TC88 or Sportster 1200S
Note: Must be used with a mechanical advance unit
Note: When using single fire electronic ignition system 17546 or 17623 you must purchase 17547 if you want to retain your tachometer
|
|
$295.50 Moto's Price! $239.95
|
|
|
|
|
|
|
|
|
|
|
|
16007 "Power Pulse" Coil For Big Twin And Sportster - "Accel's"
|
"Accel's" Power Pulse 12-volt 4.2 OHM coil features greater available spark voltage, faster rise time and longer spark duration than OEM coils. Molded in bright yellow impact resistant thermoplastic compound, this Accel coil is guaranteed to improve starting, midrange throttle response and top-end performance on points-triggered or Prestolite electronic ignition Harleys. A potent combination when teamed up with our Super Plate, Accel 8.8 ignition wires, and U-Groove spark plugs. Replaces Big Twin & Sportster molded style coils 1965/1983.
|
|
$95.50 Moto's Price! $79.95
|
|
|
|
|
|
|
|
|
|
|
|
16010 "High Performance" Round Coils For Big Tw
|
These high performance dual fire round coils produce 10% greater output capacity than stock and include a seat post type mount. The two 7mm copper core spark plug wires measure 23" long and can be cut to the desired length. The screw on tower caps include rubber seals to keep any moisture out. Fits Big Twin 4 speed 1936/1979 as listed and custom applications.
12 Volt, 4 OHM. Fits all models 1965/1979. (Imported)
|
|
$35.95 Moto's Price! $26.50
|
|
|
|
|
|
|
|
|
|
|
|
16027 "Super Coils" For Big Twin And Sportster - "ACCEL" 4.7 OHM
|
Moto's Accel's Super Coils are designed to assure maximum available spark energy, fast coil rise time, and produce a 30,000-volt output. The OEM coil produces approximately 20,000 volts making the newly installed Super Coil yield instant power gains. Using the late model OEM configuration for easy bolt on installation, the Super Coils are designed for either electronically or point fired Harley-Davidson V-Twins. The custom finned cap serves as a voltage dam to prevent arcing and flashover. The two versions of Super Coil both carry a lifetime replacement warranty with state of the art internal components.
"ACCEL" 4.7 OHM fits 12 Volt Points. Triggered Ignitions 1965/1979. (Imported)
|
|
$105.95 Moto's Price! $89.50
|
|
|
|
|
|
|
|
|
|
|
|
16028 "Super Coils" For Big Twin And Sportster - "ACCEL" 2.3 OHM
|
Accel's Super Coils are designed to assure maximum available spark energy, fast coil rise time, and produce a 30,000-volt output. The OEM coil produces approximately 20,000 volts making the newly installed Super Coil yield instant power gains. Using the late model OEM configuration for easy bolt on installation, the Super Coils are designed for either electronically or point fired Harley-Davidson V-Twins. The custom finned cap serves as a voltage dam to prevent arcing and flashover. The two versions of Super Coil both carry a lifetime replacement warranty with state of the art internal components.
"ACCEL" 2.3 OHM fits Electronic Ignition Systems on most models 1980/1999 (except OEM single fire and EFI models). (Imported)
|
|
$115.95 Moto's Price! $95.50
|
|
|
|
|
|
|
|
|
|
|
|
16050 "High Intensity" Coils For Electronic Ignition - "CRANE CAMS" 2.8 OHM.
|
These dual tower 30,000 plus volt output coils were designed to work in conjunction with and to optimize the output of Crane HI-4 ignition systems. They can be used with any 12-volt OEM or aftermarket electronic ignition system that requires a minimum of a 2 to 3 OHM coil. These coils mount in the stock location and work with most 12-volt electronic ignition models.
"CRANE CAMS" 2.8 OHM. Fits Big Twin 1970/1999 (except EFI & TC 88) and Sportster 1971/Later (except 1200s).
|
|
$115.95 Moto's Price! $85.95
|
|
|
|
|
|
|
|
|
|
|
|
16054 "High Power" Ignition Coils For 12-volt Replacement - 5.0 OHM
|
High Power 30,000 plus volt coils. Typically increase peak spark plug voltage by 20% or more. These coils are black in color and bolt into stock position. Improves starting, stops high speed miss, increases mileage and overall performance.
12-Volt 5.0 OHM fits 1965/Later Points Ignition and 1978/1979 Electronic ignitions.
|
|
$52.95 Moto's Price! $39.95
|
|
|
|
|
|
|
|
|
|
|
|
16055 "High Power" Ignition Coils For 12-volt Replacement - 4.0 OHM
|
High Power 30,000 plus volt coils. Typically increase peak spark plug voltage by 20% or more. These coils are black in color and bolt into stock position. Improves starting, stops high speed miss, increases mileage and overall performance.
12-Volt 4.0 OHM fits 1980/1984. Electronic ignitions.
|
|
$49.95 Moto's Price! $39.50
|
|
|
|
|
|
|
|
|
|
|
|
16056 "High Intensity" Coils For Electronic Ignition - "CRANE CAMS" 3.0 OHM.
|
These dual tower 30,000 plus volt output coils were designed to work in conjunction with and to optimize the output of Crane HI-4 ignition systems. They can be used with any 12-volt OEM or aftermarket electronic ignition system that requires a minimum of a 2 to 3 OHM coil. These coils mount in the stock location and work with most 12-volt electronic ignition models.
"CRANE CAMS" 3.0 OHM. Fits Big Twin 1970/1999 (except EFI & TC 88) and Sportster 1971/Later (except 1200s).
|
|
$112.95 Moto's Price! $89.50
|
|
|
|
|
|
|
|
|
|
|
|
16058 Ignition For Big Twin And Sportster
|
Add a touch of class with this chrome, 200 hour endurance tested Replacement coil. Designed in the popular 1983 style for super good looks. This coil is built to the exact specifications of the OEM part it replaces. Fits all models 1965/1979. (Imported)
|
|
$52.95 Moto's Price! $41.50
|
|
|
|
|
|
|
|
|
|
|
|
16070 Single Fire Coil For Aftermarket Ignitions - "DYNATEK"
|
"DYNATEK" At last, a high output single fire ignition coil that fits in the OE location and can be used with an OE style coil cover. This Twin Fire II coiled by DYNATEK will produce up to 40,000 volts per secondary output and has a peak gap current in excess of 50 milliamps. It can be used with 7 or 8mm spark plug wires and features a high impact thermoplastic housing with cooling fins. The primary terminals and nuts are machined from solid brass for a good transfer of electricity. Fits Big Twin and Sportster with aftermarket single fire ignitions that require a 3 OHM coil.
|
|
$155.95 Moto's Price! $142.50
|
|
|
|
|
|
|
|
|
|
|
|
16074 Single File Coils For Twin Cam And Sporster - Single Fire Coil
|
OE style, .6 OHM Coils
Designed for direct replacement on carbureted models
Single Fire Coils
Fits Carbureted Twin Cam 1999/Later & Sportster 2004/Later
Replaces HD# 31655-99
(Imported)
|
|
$76.95 Moto's Price! $61.50
|
|
|
|
|
|
|
|
|
|
|
|
16100 Coil Mount For Big Twin 4 Speed
|
This replacement coil mount is made from steel and has two well nuts permanently attached to ease coil cover installation. Fits Big Twin 4 speed Late 1978/Early 1982. Also fits the seat post on custom frames if used with a 1965/1999 OEM style coil. (Imported)
|
|
$19.95 Moto's Price! $13.95
|
|
|
|
|
|
|
|
|
|
|
|
16107 Coil Mount Kit For Sportster
|
Two piece chrome mount with hardware included. Fits Sportster XLH 1965/1978 and XLCH 1971/1978. (Imported)
|
|
$10.95 Moto's Price! $7.50
|
|
|
|
|
|
|
|
|
|
|
|
16102 Coil Covers For Big Twin - Plain.
|
Chrome plated stamped steel square style covers for 12 volt OE style coil. Fits Big Twin 4 speed 1965/Later and all Softail models 1984/1999.
Plain. Fits Big Twin 4 speed 1965/Later and Softail 1984/1999.(Rpls. HD 31800-78A)
|
|
$21.50 Moto's Price! $13.95
|
|
|
|
|
|
|
|
|
|
|
|
16114 Coil End Covers For Big Twin And Sportster
|
Coil Ends Covers made of polished stainless steel backed with adhesive material for the simplest installation. Sold in set of two. Fits Big Twin 1984/1999, and Sportster 1985/Later (except Sportster 1200S). (Imported)
|
|
$6.95 Moto's Price! $3.50
|
|
|
|
|
|
|
|
|
|
|
|
16184 Coil Cover FXR Models
|
Moto's stamped steel replacement coil cover will fit over both the early style point type coil and the later style electronic ignition type coil. Use this where the coil is located on the top engine mount. Fits FXR models 1982/Later.
|
|
$17.95 Moto's Price! $13.95
|
|
|
|
|
|
|
|
|
|
|
|
17701 Solenoid Covers For Big Twin
|
Cover the body of that dull zinc plated or black painted OEM solenoid with the chrome plated stamped steel body cover and the gray or black rubber solenoid boot with the chrome plated die cast solenoid cover. Beautiful chrome plated covers are a must for any good custom job. Fits all 4 speed Big Twin 1965/1986 and Softail models 1984/1988.
Body Cover. Fits Big Twin 4 speed 1965/1986 and Softail 1984/1988. (Imported)
|
|
$12.95 Moto's Price! $8.50
|
|
|
|
|
|
|
|
|
|
|
|
17713 Solenoid Covers For Big Twin
|
Cover the body of that dull zinc plated or black painted OEM solenoid with the chrome plated stamped steel body cover and the gray or black rubber solenoid boot with the chrome plated die cast solenoid cover. Beautiful chrome plated covers are a must for any good custom job. Fits all 4 speed Big Twin 1965/1986 and Softail models 1984/1988.
End Cover. Fits Big Twin 4 speed 1965/1986 and Softail 1984/1988. (Imported)
|
|
$13.95 Moto's Price! $9.50
|
|
|
|
|
|
|
|
|
|
|
|
17304 Generator Covers For 2 Brush Generators
|
Finest quality heavy gauge stamped steel. Easy to install and saves the time and expense of chrome plating the generator itself. Fits 1958/1981 2 brush generator.
End Covers. Plain.
|
|
$24.95 Moto's Price! $14.95
|
|
|
|
|
|
|
|
|
|
|
|
17364 Generator Covers For 2 Brush Generators
|
Finest quality heavy gauge stamped steel. Easy to install and saves the time and expense of chrome plating the generator itself. Fits 1958/1981 2 brush generator.
End Covers.
|
|
$21.95 Moto's Price! $14.95
|
|
|
|
|
|
|
|
|
|
|
|
17805 High Output Alternator Kit For Big Twin
|
Moto's say's use this 32 amp Alternator Charging System to keep all of your buzzers, bells, lights & whistles fully powered and well illuminated. The kit includes stator, rotor, voltage regulator and mounting hardware. This kit is a must for those with multiple lights or light rails and definite necessity for those towing a trailer. Fits Big Twin 4 speed 1970/1985, FLT 1982/1998 (except models with EFI), FXR 1982/1994, Dyna 1991/1998, Softail 1984/2000, OE on Big Twin 1989/1998 and Softail 1989/2000 (except models with electronic fuel injection)
|
|
$269.95 Moto's Price! $229.95
|
|
|
|
|
|
|
|
|
|
|
|
17807 Oem Alternator Rotor For Big Twin
|
When your charging system crashes and you've determined the rotor is the root of the problem, replace it with this high quality rotor. Available for 22 & 32 amp charging systems. Spacer placement instructions are included. .219" Thick and .095" Thick. Fits Big Twin 1981/1998 and Softail 1984/2000 (except EFI equipped models).(Rpls. HD 29957-81B & 29957-85A)
|
|
$99.95 Moto's Price! $79.95
|
|
|
|
|
|
|
|
|
|
|
|
14208 32 AMP BUILDERS KIT FOR BIG TWIN EVOLUTION
|
Moto's has taken the quess work out of the elctrics. We have assembled this kit to help simplify the ordering process when you are building a motorcycle from scratch. Great for high compression applications, this kit features our chrome plated USA made PowerMasterŽ starter motor. It has 1.4 KW high torque output. See the electric section for complete details about this starter motor. The chrome plated regulator/rectifier and the unmolded stator is our highly respected HARDWARE brand and also made in the USA. To fully complement this 32 amp charging system, we have included our new alternator rotor. This newly designed rotor features 12 fully encased magnets and an extra wide splined mount. See the electric section for complete details about this rotor. See the engine section for the necessary starter drive parts.
Chrome Plated Kit
Fits Big Twin Evolution models 1989/Later (except EFI)
|
|
$695.00 Moto's Price! $575.00
|
|
|
|
|
|
|
|
|
|
|
|
16072 Single Fire 45,000 Volt Coil For Big Twin & Sportster
|
Moto's 45,000 Volt Coil fits in the OE location
Compatible with OE style cover, Features a high impact thermoplastic cover, Can be used with any size spark plug wires
2.4 OHM Coil
Fits Big Twin & Sportster
Note: Not designed for use on Twin Cam, EFI, Sportster 1200S single fire ignition systems or point type ignition systems
|
|
$89.95 Moto's Price! $65.00
|
|
|
|
|
|
|
|
|
|
|
|
16073 Single Fire Super Coil For Aftermarket Ignition
|
Moto's 65,000 volts (45% higher than OEM coil)
Mounts in stock location
Designed for single spark plug per head applications
Can be used with aftermarket ignition systems that incorporate a mechanical advance
Accel Brand
3 OHM Coil
Fits Big Twin & Sportster with aftermarket single fire ignitions that require a 3 OHM coil
Note: Will not fit models with OEM single fire ignitions such as Electronic Fuel Injection, Twin Cam or 1200 Sportster Sport.
|
|
$175.95 Moto's Price! $142.50
|
|
|
|
|
|
|
|
|
|
|
|
17081 Electronic Advance Ignition For Big Twin 1936/1969 - Mallory Ignition
|
Moto's Mallory Ignition is designed to bring your generator style Big Twins ignition system up to modern standards. Dual or Single Fire with appropriate 2/4 OHM coil(s. 13 separate advance curves permit the best performance without engine pinging even on high compression engines, 6 separate RPM limit settings (256 RPM increments) from 6272 RPM through 7552 RPM
Built-in LED timing light for static timing and toubleshooting
Wired for use with or without VOES or tachometer
Front cylinder head removal is not required for installation.
Includes 40" of lead wire, shaft-to-case O-Ring and instructions
Machine Finish Ignition
Fits Big Twin 1936/1969 with 12 volt charging system
Note: 1936/1965 models require HD# 32516-66 hold down clamp or our 17535
|
|
$495.00 Moto's Price! $419.00
|
|
|
|
|
|
|
