|
|
|
|
22004 Stock Style Rear Fender for FXWG
Stock style replacement fits FXWG models 1980/1986. This fender can also be used to customize earlier FX and FL models if used with our 22702 fender supports and 13205 taillamp mount. Unpainted.
$71.66
|
|
|
|
|
|
|
|
|
|
|
22013 6" Flat Rear Fender for Rigid Frames
Designed with strength in mind, These one piece Rear Fenders are cold rolled from 14 gauge steel. They measure a full 48" in circumference and can be cut to your desired length. Fenders are not drilled or relieved for the chain or belt. Fits Big Twin & Sportster rigid frames.
6" wide flat fender.
$55.95 Moto's Price! $45.50
|
|
|
|
|
|
|
|
|
|
|
22021 OE Style Rear Fender for Fat Boy
7 1/4" wide OE style mount rear fender just like stock, Wire harness clips are installed on both sides of fender.
Use this fender to convert your FXST to a Fat Boy look.
Raw Steel.
With Taillight Mount. Fits FLSTF 1990/1996. (Imported) (Rpls. HD 59596-89)
If you are looking for a smooth no holes for tailight in your fender check out our # 22024 Fender
$135.00 Moto's Price! $99.50
|
|
|
|
|
|
|
|
|
|
|
22022 Stock Style Rear One Piece Fender for FL
Moto's one piece rear fender without taillamp provision allows custom taillamp applications. Fender strut mounting holes are provided for that perfect fit. Fits FL 4 speed 1980/1984 and will also convert FL 4 speed 1958/1980 hinged rear fender models. Unpainted.
$84.66
|
|
|
|
|
|
|
|
|
|
|
22701 Rear Fender Support for Most models
Moto's Fender Supports are Manufactured from high grade steel, except FXR applications which are made of die cast aluminum.Chrome plated.
Sold in pairs.
Fits FX 4 speed 1972/Later without Turn Signals (except FXWG).
$75.95 Moto's Price! $58.50
|
|
|
|
|
|
|
|
|
|
|
22702 Rear Fender Support for most Models
Moto's Struts are Manufactured from high grade steel, except FXR applications which are made of die cast aluminum.
Chrome plated.
Sold in pairs.
Fits FXWG 4 speed 1980/Later without Turn Signals.
$58.99 Moto's Price! $49.95
|
|
|
|
|
|
|
|
|
|
|
22738 Rear Fender Supports for Most Models
Moto's Fender Supports are Manufactured from high grade steel, except FXR applications which are made of die cast aluminum.
Chrome plated. Sold in pairs.
Fits Softail models 1986/1999 Smooth Rear Fender Supports with internal Mounting Holes.
$77.86
|
|
|
|
|
|
|
|
|
|
|
22704 Rear Fender Supports for Most Model
Moto's Struts are Manufactured from high grade steel, except FXR applications which are made of die cast aluminum.
Chrome plated.
Sold in pairs.
Fits K models and Sportster 1954/1978.
$60.61 Moto's Price! $51.50
|
|
|
|
|
|
|
|
|
|
|
22708 Rear Fender Support for Most Model
Moto's finest is Manufactured from high grade steel, except FXR applications which are made of die cast aluminum.
Chrome plated.
Sold in pairs.
Fits FL 4 speed 1977/Later.
$69.95 Moto's Price! $57.50
|
|
|
|
|
|
|
|
|
|
|
22710 Rear Fender Support Bracket
Chrome plated, heavy gauge rear fender support. Use to support Fat Bob rear fender when a sissy bar is not used with rigid frame. Fits most rigid frames.
$43.50 Moto's Price! $27.95
|
|
|
|
|
|
|
|
|
|
|
22731 Rear Fender for Most Model
Manufactured from high grade steel, except FXR applications which are made of die cast aluminum.
Chrome plated.
Sold in pairs.
Fits FXR models 1987/Later
$83.73 Moto's Price! $79.95
|
|
|
|
|
|
|
|
|
|
|
22803 Rear Fender Support for Rigid Frame
Moto's fender support must be used when sissy bar is not used, to support fender on Rigid Frame motorcycle. Made of 3/16" x 3/4" steel. Chrome plated. Fits 5" & 6" flat fenders.
$48.50 Moto's Price! $34.95
|
|
|
|
|
|
|
|
|
|
|
22902 Rear Fender Clamps for Rigid Frame
Moto's clamps fit around the cross member section of rigid frames to securely mount the rear fender. Available with or without mounting hardware as shown. Order mounting hardware separately if needed. All clamps sold each.
Clamp with mounting hardware fits custom rigid frames with straight 1" O.D. cross member and custom fender
$4.21 Moto's Price! $3.95
|
|
|
|
|
|
|
|
|
|
|
22011 Stock Style Rear Fender For Sportster 1979/1981
A high quality super clean OE style replacement rear fender with all the holes drilled, ready for paint and installation. Fits Sportster models 1979/1981. Unpainted. (Imported) Motoscycle
$48.50
|
|
|
|
|
|
|
|
|
|
|
22002 Stock Style Rear Fender For Fx And Fxe
Moto's super clean styled Rear Fender for many uses, or use as stock replacement. Fits all FX, FXE 4 speed models 1973/Later, except, FXWG & FXST. Stock 6 1/2" wide x 40" long with taillamp mount. Unpainted. (Imported)
$82.95 Moto's Price! $68.50
|
|
|
|
|
|
|
|
|
|
|
22053 Rear Fender For Fl 4 Speed
This Moto's fender is designed without turn signal indents.
Hinged two piece design available with 1973/1993 style taillight mount or smooth for use with custom taillights.
These fenders will also fit FX 4 speed models 1971/Later if FL style fender supports are used.
Raw steel.
Fits FL 4 speed models 1958/Later. Without Taillamp Mount (smooth). (Imported)
Retail List - $145.00 Wt - 9.58lbs.
$110.50
|
|
|
|
|
|
|
|
|
|
|
22095 Rear Fender For Fl 4 Speed
These fenders are designed without turn signal indents. Hinged two piece design available with 1973/1993 style taillight mount or smooth for use with custom taillights.
These fenders will also fit FX 4 speed models 1971/Later if FL style fender supports are used.
Raw steel. Fits FL 4 speed models 1958/Later. With taillight mount. (Imported)
Retail List - $143.15 Wt - 9.34lbs.
$99.50
|
|
|
|
|
|
|
|
|
|
|
22018 Stock Style Rigid Rear Fender For Big Twin 1949/1957
Rear Fender for Rigid frame is complete with the brackets and seat clip mounting holes. Rear hinged section is smooth and undrilled. Unpainted. Fits FL 1949/1957. (Imported)
Retail List - $189.75 Wt - 11.86lbs.
$126.50
|
|
|
|
|
|
|
|
|
|
|
22060 OEM Style Rear Fenders For Fxst Models
Raw Steel
Excellent copies of the original
Fits FXST models 2000/2002
Replaces HD# 59914-00
(Imported)
Retail List - $189.25 Wt - 6.8lbs.
$125.00
|
|
|
|
|
|
|
|
|
|
|
22024 OEM Style Rear Fenders For Fatboy
7 1/4" wide feature your choice of OE style mount or smooth without taillight mount for custom application. Wire harness clips are installed on both sides of fender.
Use either fender to convert your FXST to a Fat Boy look. Raw Steel.
Without Taillight Mount. Fits FLSTF (FATBOY) 1990/1996. (Imported)
Retail List - $139.15 Wt - 6.8lbs.
$98.50
|
|
|
|
|
|
|
|
|
|
|
22014 Fat Bob Rear Fenders For Universal Custom
These 7" wide Rear Fender measure 38" in total length and are stamped from 19 guage steel. The smooth (non-drilled) sides allow you to position the fender exactly where you want it. Use on swingarm frame or rigid frame. Unpainted.
Discontinued
Right Chain. (Imported)
Retail List - $99.95 Wt - 6.15lbs.
$69.95
|
|
|
|
|
|
|
|
|
|
|
22009 Fat Bob Rear Fenders For Universal Custom
These 7" wide Rear Fender measure 38" in total length and are stamped from 19 guage steel. The smooth (non-drilled) sides allow you to position the fender exactly where you want it. Use on swingarm frame or rigid frame. Unpainted.
Left Chain. (Imported)
Retail List - $89.95 Wt - 5.95lbs.
$58.50
|
|
|
|
|
|
|
|
|
|
|
22902 Rear Fender Clamps For Rigid Frame
These clamps fit around the cross member section of rigid frames to securely mount the rear fender. Available with or without mounting hardware as shown. Order mounting hardware separately if needed. All clamps sold each.
Clamp with mounting hardware fits custom rigid frames with straight 1" O.D. cross member and custom fender.
Retail List - $6.95 Wt - 0.178lbs.
$4.50
|
|
|
|
|
|
|
|
|
|
|
22962 Rear Fender Clamps For Rigid Frame
Moto's clamps fit around the cross member section of rigid frames to securely mount the rear fender. Available with or without mounting hardware as shown. Order mounting hardware separately if needed. All clamps sold each.
Two clamps with mounting hardware fits HARDBODY rigid wide tire frames and all aftermarket frames with 1 1/8" O.D. cross member.
$12.95 Moto's Price! $9.50
|
|
|
|
|
|
|
|
|
|
|
22710 Rear Fender Support For Fat Bob Rear Fender
MOTO'S Chrome plated, heavy gauge rear fender support. Use to support Fat Bob rear fender when a sissy bar is not used with rigid frame. Fits most rigid frames.
$35.95 Moto's Price! $26.50
|
|
|
|
|
|
|
|
|
|
|
22711 Rear Fender Supports For Wide Tire Rigid Frames
Moto's top quality rear fender supports designed to fit wide tire rigid frames. Available to support most metal fenders 7 1/2" wide, 8 1/2" wide and 9" wide when not using a sissy bar. When using fiberglass or composite fender use next smaller size fender support.
7 1/2" wide.
$48.95 Moto's Price! $37.50
|
|
|
|
|
|
|
